DIY point drill socks production steps: 1. Open the package and check whether the diamond painting tools are complete; 2. According to the color code of the resin diamond, choose a color on the plate. If the same color is pasted at a time, the speed can be increased; 3. Find the corresponding color code on the sock pasting part, and start pasting until it is completed; 4. After the completion, in order to make the diamond stable, you can lightly press on the diamond part for a while; Precautions for DIY diamond painting: 1. Refer to the previous steps 2. If you don't know what color to use, please refer to the color table Reminder: Due to different measurement methods, there may be an error of 1~3cm. This is a sock with diy diamonds. It is not finished. You need to finish it yourself. You only need to DIY the diamonds. All products are measured manually, please allow 1-2 cm deviation Cleaning will reduce the viscosity of the glue, and the drilled part cannot be cleaned
1 set of X diamond painting tools (rhine stone needs to be pasted) 1X socks
DIAMOND PAINTING INSTRUCTIONS
Remove all items from the package
Lay out the canvas on a clean, flat surface
Choose a single color diamond to get started with
Place the diamonds in the included grooved tray for easy picking
Dip the tip of the applicator in the wax. This will help you pick up the diamonds.
Note: some kits come with wax. Others come with tweezers - your choice!
Press the tip of the applicator tool on the rounded side of the diamond
Peel back the plastic film and carefully press the diamond onto its corresponding symbol