Specification:
Product size: 170.00x150.00x10.00mm/6.69x5.91x0.39inch
Material: high-quality acrylic board + round diamond
Color: as shown in the picture
Power supply: 1 AAA battery (due to logistics problems, this product does not come with batteries, please buy it by yourself)
Space: living room/bedroom/classroom
DIY diamond painting production steps:
1. Open the box and check whether the tools for diamond painting are complete;
2. According to the color code of the resin diamond, choose a color on the plate. If you paste the same color at one time, you can increase the speed;
3. Find the corresponding color code on the ornament and start pasting until it is completed;
4. After it is completed, in order to make the diamond stable, you can take some books and press them on the diamond sticking part for a while;
5. After the diamond is attached, fix the diamond drawing board on the oscillator with double-sided tape,
6. Install the battery, turn on the switch and start shaking the ornament.
Precautions for DIY diamond painting:
1. Refer to the previous operation steps
2. If you don't know what color to use, please refer to the color chart
Note:
1. This is a DIY dot diamond art ornament, it is not finished, you need to finish it yourself. All products are measured manually, please allow 1-2 cm deviation.
2. Due to different light and screen, the color of the product may be slightly different from the picture. Please understand
Washing will affect the viscosity of the glue, please do not wash with water.
Package Content:
1*Acrylic board
1 set*Drilling kit (rhinestone needs to be pasted) (Drilling pen*1 Drilling plate*1 Drilling mud*1)
1*Oscillator (double-sided tape needs to be pasted)
Product size: 170.00x150.00x10.00mm/6.69x5.91x0.39inch
Material: high-quality acrylic board + round diamond
Color: as shown in the picture
Power supply: 1 AAA battery (due to logistics problems, this product does not come with batteries, please buy it by yourself)
Space: living room/bedroom/classroom
DIY diamond painting production steps:
1. Open the box and check whether the tools for diamond painting are complete;
2. According to the color code of the resin diamond, choose a color on the plate. If you paste the same color at one time, you can increase the speed;
3. Find the corresponding color code on the ornament and start pasting until it is completed;
4. After it is completed, in order to make the diamond stable, you can take some books and press them on the diamond sticking part for a while;
5. After the diamond is attached, fix the diamond drawing board on the oscillator with double-sided tape,
6. Install the battery, turn on the switch and start shaking the ornament.
Precautions for DIY diamond painting:
1. Refer to the previous operation steps
2. If you don't know what color to use, please refer to the color chart
Note:
1. This is a DIY dot diamond art ornament, it is not finished, you need to finish it yourself. All products are measured manually, please allow 1-2 cm deviation.
2. Due to different light and screen, the color of the product may be slightly different from the picture. Please understand
Washing will affect the viscosity of the glue, please do not wash with water.
Package Content:
1*Acrylic board
1 set*Drilling kit (rhinestone needs to be pasted) (Drilling pen*1 Drilling plate*1 Drilling mud*1)
1*Oscillator (double-sided tape needs to be pasted)
DIAMOND PAINTING INSTRUCTIONS
-
Remove all items from the package
-
Lay out the canvas on a clean, flat surface
-
Choose a single color diamond to get started with
-
Place the diamonds in the included grooved tray for easy picking
-
Dip the tip of the applicator in the wax. This will help you pick up the diamonds.
-
Note: some kits come with wax. Others come with tweezers - your choice!
-
-
Press the tip of the applicator tool on the rounded side of the diamond
-
Peel back the plastic film and carefully press the diamond onto its corresponding symbol
-
Repeat the process until you're done!
