Origin: Mainland China
Style: Modern Style
Material: High Quality Acrylic + Bright Diamond
Size: 200.00x190.00x10.00mm/7.87x7.48x0.39inch
Weight: about 180g
Space: Living room/bedroom/classroom
DIY diamond painting production steps:
1. Open the box and check whether the tools for diamond painting are complete;
2. According to the color code of the resin diamond, choose a color on the plate. If you paste the same color at one time, you can increase the speed;
3. Find the corresponding color code on the ornament and start pasting until it is completed;
4. After it is completed, in order to make the diamond stable, you can take some books and press them on the diamond-sticking part for a while;
5. After the diamond is attached, stick the double-sided tape on the bottom of the Christmas tree ornament, tear off the double-sided tape, insert the base, string the small pendant with a rope, and hang it on the Christmas tree
Precautions for DIY diamond painting:
1. Refer to the previous operation steps
2. If you don't know what color to use, please refer to the color chart
Note:
This is a DIY diamond art ornament, it is not finished, you need to finish it yourself.
Washing will affect the viscosity of the adhesive, please do not wash with water.
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.
Package Content:
1x Acrylic Board
1x Acrylic Base
1 Set x Diamond Kit (Rhinestone Needs To Be Glued) (Diamond Pen x1, Diamond Plate x1, Diamond Mud x1)
DIAMOND PAINTING INSTRUCTIONS
-
Remove all items from the package
-
Lay out the canvas on a clean, flat surface
-
Choose a single color diamond to get started with
-
Place the diamonds in the included grooved tray for easy picking
-
Dip the tip of the applicator in the wax. This will help you pick up the diamonds.
-
Note: some kits come with wax. Others come with tweezers - your choice!
-
-
Press the tip of the applicator tool on the rounded side of the diamond
-
Peel back the plastic film and carefully press the diamond onto its corresponding symbol
-
Repeat the process until you're done!
