Origin: Mainland China
Size: 220.00x160.00x10.00mm/8.66x6.3x0.39inch
Material: Wood
DIY diamond painting production steps:
1. Open the package and check whether the diamond painting tools are complete;
2. According to the color code of the resin diamond, choose a color on the plate. If you paste the same color at one time, you can increase the speed;
3. Find the corresponding color code on the product and start pasting until it is completed;
4. After it is completed, in order to make the diamond painting stable, you can take some books and press them on the board for a while;
5. Finally, it is completed, cross-piece it and hang it on the table for use.
Note:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.
Package Content:
1 x Necklace Display Stand
1 x Diamond Painting Tool (rhinestones need to be pasted)
DIAMOND PAINTING INSTRUCTIONS
-
Remove all items from the package
-
Lay out the canvas on a clean, flat surface
-
Choose a single color diamond to get started with
-
Place the diamonds in the included grooved tray for easy picking
-
Dip the tip of the applicator in the wax. This will help you pick up the diamonds.
-
Note: some kits come with wax. Others come with tweezers - your choice!
-
-
Press the tip of the applicator tool on the rounded side of the diamond
-
Peel back the plastic film and carefully press the diamond onto its corresponding symbol
-
Repeat the process until you're done!
