Origin: Mainland China
Product size: 150.00x170.00x10.00mm/5.91x6.69x0.39inch
Material: High Quality Acrylic Plate + Crystal Diamond
Color: As shown in the picture
Power supply: 1 AAA battery (due to logistics issues, this product does not come with a battery, please purchase it yourself)
1. Open the packaging box and check if the diamond drawing tools are complete;
2. Based on the color coding of resin diamonds, choose a color on the plate. If the same color is pasted well at once, it can improve the speed;
3. Find the corresponding color code on the ornament and start pasting until completed;
4. After completion, in order to stabilize the diamond, you can take some books and place them on top of the diamond sticking section for a while;
5. After the diamonds are attached, fix the diamond drawing board on the oscillator with double-sided tape.
6. Install the battery, turn on the switch and start the oscillator to shake.
1. Refer to the previous operating steps
2. If you don't know what color to use, please refer to the color chart
Attention:
1. This is a DIY diamond art ornament that has not been completed yet. You need to complete it yourself.
2. Cleaning will affect the adhesion of the adhesive, please do not wash with water
Note:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.
Package Content:
1 x Acrylic Board
1 Set x Drilling Kit (Rhinestone needs to be pasted) (1 xDrilling Pen, 1 x Drilling Plate, 1 x Drilling Mud)
1 x Rocker (Double-sided tape needs to be pasted)
DIAMOND PAINTING INSTRUCTIONS
-
Remove all items from the package
-
Lay out the canvas on a clean, flat surface
-
Choose a single color diamond to get started with
-
Place the diamonds in the included grooved tray for easy picking
-
Dip the tip of the applicator in the wax. This will help you pick up the diamonds.
-
Note: some kits come with wax. Others come with tweezers - your choice!
-
-
Press the tip of the applicator tool on the rounded side of the diamond
-
Peel back the plastic film and carefully press the diamond onto its corresponding symbol
-
Repeat the process until you're done!
