Origin: Mainland China
Style: Classic Category: DIY Diamond Handmade Card
Size: 150.00x150.00x10.00mm/5.91x5.91x0.39inch (after the greeting card is folded in half)
Material: High-quality partial shaped diamond + thick cardboard
DIY diamond painting usage steps:
1. Open the package and check the special tools for diamond painting
2. Check the resin diamond color and arrange it in the coding order
3. Uncover the tape chart above, you will see many symbols corresponding to the color coding
4. According to the corresponding color-coded fixture, the resin inlaid diamonds
5. It is recommended that one set of resin diamonds is completed faster
6. In order to make a perfect diamond greeting card, put the drawing in one place, and each row of symbols does not have to leave diamonds
7. To cut a good figure on the drawing, please install the classification array to the plane of the material above
8. The splicing needs to be flat, neat, and without cracks
Note:
1. This is a DIY diamond card, not finished, you need to finish it yourself. All products are measured manually, please allow 1-2 cm
Deviation
2. Due to the light and screen difference, the color of the item may be slightly different from the pictures. Please understand
Note:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.
Package Content:
1 Set*Diamond Cardboard
1*Diamond Painting Tools (Drill Pen, Speed Plate, Diamond Bag)
DIAMOND PAINTING INSTRUCTIONS
-
Remove all items from the package
-
Lay out the canvas on a clean, flat surface
-
Choose a single color diamond to get started with
-
Place the diamonds in the included grooved tray for easy picking
-
Dip the tip of the applicator in the wax. This will help you pick up the diamonds.
-
Note: some kits come with wax. Others come with tweezers - your choice!
-
-
Press the tip of the applicator tool on the rounded side of the diamond
-
Peel back the plastic film and carefully press the diamond onto its corresponding symbol
-
Repeat the process until you're done!
