Origin: Mainland China
Style: Classic Style
Size: 150.00x150.00x10.00mm/5.91x5.91x0.39inch
Diamond Material: Resin
Material: High quality special shaped diamond + Thick Cardboard
DIY diamond painting use steps:
1. Open the package and check the diamond painting special tools
2. Check the resin diamond color and arrange it in the coding order
3. Uncover the tape diagram above, you will see many symbols corresponding to the color coding
4. According to the corresponding color coding fixture corresponding to the resin inlaid diamond
5. It is recommended that one set of resin diamonds is completed faster
6. In order to make a perfect diamond greeting card, put the drawing in one place, and each row of symbols does not have to leave diamonds
7. To cut a good figure on the drawing, please install the classification array to the plane of the material above
8. The splicing needs to be flat, neat, and without cracks
Note:
This is a DIY diamond card, not finished, you need to finish it yourself.
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.
Note:
Due to different monitor settings and lighting conditions, the actual color of the item may vary slightly from the pictures. Thanks for your understanding!
Please allow a 1-2 cm difference in measurements due to manual measuring.
Package Content:
1 Set x Diamond Card Paper
1 Set x Greeting Card Envelopes
1 Set x Diamond Painting Tools (Diamond Pen, Speed Plate, Diamond Bag)
DIAMOND PAINTING INSTRUCTIONS
-
Remove all items from the package
-
Lay out the canvas on a clean, flat surface
-
Choose a single color diamond to get started with
-
Place the diamonds in the included grooved tray for easy picking
-
Dip the tip of the applicator in the wax. This will help you pick up the diamonds.
-
Note: some kits come with wax. Others come with tweezers - your choice!
-
-
Press the tip of the applicator tool on the rounded side of the diamond
-
Peel back the plastic film and carefully press the diamond onto its corresponding symbol
-
Repeat the process until you're done!
