Specification:
Origin: Mainland China
Use: Car Pendant
Style: Modern
Material: Key ring+special-shaped bright drill
Size: approx 7x4cm/2.76x1.57in
DIY diamond drawing production steps:
1. Open the packing box and check the special tools for diamond drawing
2. Check the color of resin diamonds and arrange them according to the coding sequence
3. Uncover the tape image above and you will see many symbols corresponding to color coding
4. Inlay diamonds according to the resin corresponding to the corresponding color coding fixture
5. It is recommended that a set of resin diamonds be completed faster
6. In order to make a perfect diamond drawing, put the drawing in one place, and each line of symbols need not leave diamonds
7. To cut a good figure on the drawing, please install the classification array on the plane of the upper material
8. The splicing shall be flat, neat and free of cracks
9. After good struggle, the remaining glue gaps conform to the symbol of diamond
This is DIY diamond drawing Key ring. It is not finished. You need to finish it yourself.
Note:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.
1 Set X Keychain
1 Set X Diamond drawing Tool (point drill pen, speed increasing disc)
DIAMOND PAINTING INSTRUCTIONS
Remove all items from the package
Lay out the canvas on a clean, flat surface
Choose a single color diamond to get started with
Place the diamonds in the included grooved tray for easy picking
Dip the tip of the applicator in the wax. This will help you pick up the diamonds.
Note: some kits come with wax. Others come with tweezers - your choice!
Press the tip of the applicator tool on the rounded side of the diamond
Peel back the plastic film and carefully press the diamond onto its corresponding symbol