Origin: Mainland China
Style: Classic Style
Material: high-quality wood board + round diamond + special-shaped diamond
Color: as shown in the picture
Space: living room/bedroom/classroom
DIY diamond painting production steps:
1. Open the packaging box and check whether the diamond painting tools are complete;
2. According to the resin diamond color coding, select a color on the plate. If you paste the same color at one time, the speed can be increased;
3. Find the corresponding color code on the ornament and start pasting until completed;
4. After completion, in order to make the diamond stable, you can put some book pressure on the diamond-attached part for a while;
5. After the drilling is completed, stick the double-sided tape on the bottom of the Christmas tree ornaments, tear off the double-sided tape, insert it into the base, string the small pendant on the rope, and hang it on the Christmas tree
Precautions for DIY Diamond Painting:
1. Refer to previous steps
2. If you don't know what color to use, please refer to the color chart
Note:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.
1. This is a DIY dot diamond art ornament, it is not finished, you need to complete it yourself.
2. Cleaning will affect the stickiness of the glue, please do not wash it with water.
Package Content:
1x Wooden Dot Drill Board
1x Base
1 Set x Drilling Bag (Rhinestone Needs To Be Pasted) (1x Drilling Pen, 1x Drilling Disc, 1x Drilling Mud)
DIAMOND PAINTING INSTRUCTIONS
-
Remove all items from the package
-
Lay out the canvas on a clean, flat surface
-
Choose a single color diamond to get started with
-
Place the diamonds in the included grooved tray for easy picking
-
Dip the tip of the applicator in the wax. This will help you pick up the diamonds.
-
Note: some kits come with wax. Others come with tweezers - your choice!
-
-
Press the tip of the applicator tool on the rounded side of the diamond
-
Peel back the plastic film and carefully press the diamond onto its corresponding symbol
-
Repeat the process until you're done!
