Specification: Material: modeling lamp + resin diamond Size: 21*16*5cm Light source: LED lamp beads Power supply: battery
DIY diamond painting production steps: 1. Open the box and check the special tools for diamond painting 2. View the color of resin diamonds and arrange them in order of coding 3. Uncover the tape picture above, you will see many symbols corresponding to the color coding 4. According to the corresponding color-coded fixture, the resin inlaid diamonds 5. It is recommended to complete a set of resin diamonds faster 6. In order to make a perfect diamond painting, put the drawing in one place, every line of symbols does not have to leave diamonds 7. To cut a good figure on the drawing, please install the sorting array on the plane of the above material 8. The splicing needs to be flat, neat and without cracks 9. After a good struggle, the remaining glue gaps are in line with the diamond symbol
notes: This is a DIY diamond painting, not finished, you need to finish it yourself. All products are manually measured, please allow 1-2cm deviation. Since the light is different from the screen, the color of the item may be slightly different from the picture. beg to be excused
1 * lamp 1 * Point drilling accessories (drill, point drilling pen, point drilling mud, point drilling plate)
DIAMOND PAINTING INSTRUCTIONS
Remove all items from the package
Lay out the canvas on a clean, flat surface
Choose a single color diamond to get started with
Place the diamonds in the included grooved tray for easy picking
Dip the tip of the applicator in the wax. This will help you pick up the diamonds.
Note: some kits come with wax. Others come with tweezers - your choice!
Press the tip of the applicator tool on the rounded side of the diamond
Peel back the plastic film and carefully press the diamond onto its corresponding symbol